Home          
       About Us       
       Products       
    Online Store    
Request A Quote
  Contact Us  
A. #MANDREL09
Cartridge Mandrel 1/4" shank X 1" length 3/16" pilot X 3/4" length. For use with Cartridge Rolls.

B.#MANDREL06
1-1/2" x 1/8" x 1/2 (for 1/8 center hole) 1/8"shank 1/2"washer for use with small buffing wheels. Single buffs with Pinhole center or Buffs with 1/8" hole.

C.#MANDREL05
Taper spindle 1-3/4 x 1/4 x 1/2 (1/4" Shank/ 1/4'taper) For use with pinhole center buffs or mainly used for taper buffs, goblet buffs and, cylinder buffs.

D.#MANDREL04
2" x 1/4" x 1" for 1/4 center hole buffs (1"face max) This mandrel is for mounting buffing wheels with " arbor holes. The shank is also " for " tools and Drills. You can stack up to four 20 ply buffing wheels on the shaft (1 inch maximum buff face). E.#MANDREL11
Black screw head Mandrel 1/4" shank to 1/2"AH for 1/2" hole buffs. This mandrel is for mounting buffing wheels with 1/2" arbor holes. The shank is 1/4" for 1/4" tools and Drills. You can stack up to four 20 ply buffing wheels on the shaft (1 inch maximum buff face).

F.#MANDREL12
Chrome 1/2" mandrel for 1/2" arbor hole buffs with 1/4" shank. This mandrel is for mounting buffing wheels with 1/2" arbor holes. The shank is 1/4" for 1/4" tools and Drills. You can stack up to four 20 ply buffing wheels on the shaft ( 1 inch maximum buff face).

G.#MANDREL01
" Shaft extender, 1/2" shaft diameter. 5/8" or 1/2" adapter for connecting to and extending 1/2" or 5/8" shafts. 2" shaft length /with key (1-3/4" maximum buff face) For use with your motor or shaft. This adapter will mount with supplied allen key to either 1/2" or 5/8" shafts or motor shafts. For turning a motor into a buffing machine.             Back