12 x 5 Inch, Treated Sisal Buffing Wheel - FIRM RED 1-1/4" Centerhole


12 Inch Bias Sisal Buffing Wheel 5" center FIRM RED TREATMENT 1-1/4" Center hole The Red treatment in this buff was designed to add extra firmness to the wheel. These buffs are for maximum pressure and cut. They also have good compound retention. Treated buffs last at least twice as long as untreated buffs and are more economical. Like the untreated sisal buffing wheel these wheels are used for cut down operations on steel, stainless steel and aluminum. They work well as first step buffs when preparing work for the final high luster step. Use a liquid or bar type steel cut buffing compound like BP-415, BP-401, or BP-408 with these buffing wheels. Sisal buffs are designed to take the pressure needed to buff out abrasive belt lines and scratches. These buffs are the same as full disc sisal buffs except the buffs are formed from bias cut strips of sisal and a metal center clinch ring is used same as bias airway buffs. These buffing wheels are roughly 3/4" thick. You can stack as many on the buffing shaft as needed to build the desired buff face. Only use this buff when maximum cut and pressure are needed.

WARNING  Airway Buffs MUST BE used with the proper size Steel End Flanges, Center plates alone will not support the buffing wheel on the shaft. It is very dangerous to try and use Airway Buffing Wheels without the proper size steel end flanges.